Product Description
The Roadmaster 152-LED is a towed-vehicle lighting kit that uses LED bulb-and-socket assemblies instead of diodes. The two LED assemblies are installed in the towed vehicle's taillight housings and powered from the motorhome through the included 27-foot, 4-wire harness, so the towed vehicle displays the motorhome's turn, brake and running light signals while flat towing.
LEDs are brighter, light up faster and last longer than incandescent bulbs, and because they run cool there is little risk of heat damage to the taillight lens. The kit includes the harness, connectors, loom and hardware needed for a typical install.
Taillight housings vary by vehicle. Contact us with your vehicle's year, make and model if you're unsure whether a bulb-and-socket kit or a diode kit is the better fit.
Specifications
- Manufacturer: Roadmaster
- Part number: 152-LED
- Type: Towed-vehicle LED bulb-and-socket wiring kit
- Harness length: 27 feet, 4-wire
- Warranty: Roadmaster lists a limited 1-year warranty
What's Included
- 27-foot 4-wire electrical harness
- 2 LED and socket assemblies
- Ring terminal
- 3 yellow and 3 blue butt connectors
- Self-tapping screw
- 13 wire ties
- 3 feet of 1/2-inch split loom
Helpful Links
Pro tipWiring and battery tips
- Protect the car’s wiring. Diodes or a separate bulb kit keep the motorhome’s lighting signal from feeding back into the towed vehicle’s electrical system.
- Watch the battery. Some vehicles drain their battery when flat towed; the owner’s manual will say whether you need a charge line or battery disconnect.
Not sure what fits? Send us your vehicle — we’ll confirm before you order.
Own this part? Be the first to review it.
Your experience helps other RVers choose with confidence. Tell us what you tow, how installation went and how it’s held up on the road.
✓ Takes about 2 minutes✓ Photos of your rig are a big help