Product Description
The Roadmaster 157 is an LED tow light kit that adds separate turn, running and brake lights to a towed vehicle using two 10-inch LED light strips. It works on almost any towed vehicle, and it's especially useful for vehicles where traditional wiring diodes won't work with the factory lighting.
A dedicated wiring harness runs from the front to the rear of the towed vehicle, with a built-in "Y" that reaches both sides. The LED strips mount with pre-installed 3M removable adhesive tape, so you can place them where they're most visible and remove them later if needed. Flip-latch connectors, pre-stripped and tinned wire ends and color-coded wiring make for a straightforward install.
Specifications
- Manufacturer: Roadmaster
- Part number: 157
- Type: LED tow light strip kit
- Functions: Turn signals, running lights and brake lights
- Light strips: Two 10-inch LED strips (78 LEDs total)
- Light output: 152 lumens at 12.3 volts
- Weather rating: IP68 (protected from moisture and dust)
- Mounting: 3M removable adhesive tape, pre-installed
- Wiring included: Yes
- Estimated install time: About 1 hour
Helpful Links
Pro tipWiring and battery tips
- Protect the car’s wiring. Diodes or a separate bulb kit keep the motorhome’s lighting signal from feeding back into the towed vehicle’s electrical system.
- Watch the battery. Some vehicles drain their battery when flat towed; the owner’s manual will say whether you need a charge line or battery disconnect.
Not sure what fits? Send us your vehicle — we’ll confirm before you order.
Own this part? Be the first to review it.
Your experience helps other RVers choose with confidence. Tell us what you tow, how installation went and how it’s held up on the road.
✓ Takes about 2 minutes✓ Photos of your rig are a big help