Manual Jacks

MANUAL JACKS

A-FRAME TOP-WIND & SIDE-WIND JACKS

  • Durable powder-coat and zinc plate finish

  • All A-frame tongue jacks have a pin hole for casters and foot pads

  • Maximum stroke 14-7/8” for top-wind jacks and 15-3/8” for side-wind jacks

  • Designed to accept a foot pad

  • Zerk fitting provided for convenient lubrication

JACK CAPS

88131 – 1,000 lb, Side-wind
88132 – 2,000 lb, Side-wind

SIDE-WIND SWIVEL JACK

  • Easily swivels to horizontal towing position

  • 1,000 lb rated tongue load

  • Ergonomic handle grip

  • Fits tongues up to 3” thick x 3”-5” height

  • 10” Vertical travel

  • Heavy duty polypropylene wheel

  • Side crank with heavy duty drive screw

  • Zinc plated finish

  • Heavy duty pivot joint

  • Zerk fitting provided for convenient lubrication

  • Mounting hardware and instructions included

TOP-WIND JACK Table

PART# CAPACITY STROKE OUTER TUBE INNER TUBE EXTENDED HEIGHT** RETRACTED HEIGHT**
30774 1,000 lb 14-7/8” 2” 1-3/4” 23-3/8” 8-1/2”
88126 1,000 lb 14” 2” 1-3/4” 23-3/8” 8-1/2”
30775 2,000 lb 14” 2-1/4” 2” 23-1/4” 9-1/4”
88127* 2,000 lb 14” 2-1/4” 2” 23-1/4” 9-1/4”
30780 5,000 lb 14-1/2” 2-1/4” 2” 25-1/2” 11”
88128* 5,000 lb 14-1/2” 2-1/4” 2” 25-1/2” 11”

* These items are in bulk packaging.
** From the mounting plate.

SIDE-WIND JACK Table

PART# CAPACITY STROKE OUTER TUBE INNER TUBE EXTENDED HEIGHT** RETRACTED HEIGHT**
30781 1,000 lb 15-3/8” 2” 1-3/4” 24-1/4” 8-7/8”
88130* 2,000 lb 15-3/8” 2” 2” 23-1/2” 9-1/8”

SIDE-WIND SWIVEL JACK Table

PART# CAPACITY STROKE OUTER TUBE INNER TUBE EXTENDED HEIGHT RETRACTED HEIGHT
30655 1,000 lb 10” 2” 1-3/4” N/A N/A

SCISSOR JACKS

  • Levels and stabilizes 5th wheel and travel trailers

  • Constructed with durable steel and finished with rust-resistant black e-coating

  • Designed for today’s larger and heavier trailers

  • Conveniently concealed when not in use

  • Easy to install, extend and retract

  • Large 26 square inch foot pad

  • Bolt-on front and rear universal applications

Accessories:

76850 – Speed handle for 7,500 lb. jack
88123 – Speed handle for 5,000 lb. jack
71195 – Screw kit, 8/pkg

SCISSOR JACK Table

PART# QUANTITY MODEL CAPACITY HANDLE LIFT WEIGHT RETRACTED HEIGHT**
76862* Pair Heavy Duty 7,500 lb (each) Swivel 24” 12.3 lb (each) 4-5/16”
72193 Single Heavy Duty 7,500 lb Not included 24” 12.3 lb 4-5/16”
88124* Pair Standard 5,000 lb (each) Non-swivel 30” 15.7 lb (each) 4-5/16”
88125* Single Standard 5,000 lb Not included 30” 15.7 lb 4-5/16”
88121* Pair Economy 5,000 lb (each) Non-swivel 24” 10.2 lb (each) 4-5/16”
88122* Single Economy 5,000 lb Not included 24” 10.2 lb 4-5/16”
88134* Pair Leveling 5,000 lb (each) Non-swivel 20” 10 lb (each) 4-5/16”
88135 Single Leveling 5,000 lb Not included 20” 10 lb 4-5/16”

* Jacks packaged in pairs come with crank handles, mounting screws and instructions. Single jacks are individual replacements only.

DRILL SOCKET ADAPTER

  • Enables faster raising and lowering of scissor jacks

  • Fits all 3/4” hex drive jacks

  • Durable, zinc-plated non-corrosive finish

  • Made from steel for strength and durability

  • Fits 3/8” and larger drill chucks
    88120 – Drill Socket Adapter

No products found
Use fewer filters or remove all