{"title":"Trailer Couplers \u0026 Repair Kits","description":"\u003cp\u003eStraight-tongue and A-frame trailer couplers plus coupler repair kits. Replace a worn coupler for a safer, easier hook-up.\u003c\/p\u003e","products":[{"product_id":"husky-87070-trailer-coupler","title":"Husky Trailer Coupler – Straight 2 Inch Wide Channel Mount, 1-7\/8 Inch Ball | 87070","description":"\u003cp\u003eThe Husky 87070 is a straight-tongue trailer coupler for a 1-7\/8-inch hitch ball, rated for 2,000 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 2-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 2-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e1-7\/8-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 2,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87082-trailer-coupler-repair-kit\"\u003eHusky 87082 coupler repair kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405755576571,"sku":"87070","price":12.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_05ac8acc-39a4-48f3-bf5c-3f39e225749d.jpg?v=1793129905"},{"product_id":"husky-87071-trailer-coupler","title":"Husky Trailer Coupler – Straight 2-1\/2 Inch Wide Channel Mount, 1-7\/8 Inch ball | 87071","description":"\u003cp\u003eThe Husky 87071 is a straight-tongue trailer coupler for a 1-7\/8-inch hitch ball, rated for 2,000 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 2-1\/2-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 2-1\/2-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e1-7\/8-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 2,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87082-trailer-coupler-repair-kit\"\u003eHusky 87082 coupler repair kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405757149435,"sku":"87071","price":13.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_d9012dbe-eb1d-4113-8be8-9b6a527b5d52.jpg?v=1793129905"},{"product_id":"husky-87072-trailer-coupler","title":"Husky Trailer Coupler – Straight 3 Inch Wide Channel Mount, 1-7\/8 Inch ball | 87072","description":"\u003cp\u003eThe Husky 87072 is a straight-tongue trailer coupler for a 1-7\/8-inch hitch ball, rated for 2,000 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 3-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 3-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e1-7\/8-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 2,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87082-trailer-coupler-repair-kit\"\u003eHusky 87082 coupler repair kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405757346043,"sku":"87072","price":13.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_848ee5e4-aefe-4fae-9aba-81ae2718d754.jpg?v=1793129906"},{"product_id":"husky-87073-trailer-coupler","title":"Husky Trailer Coupler – Straight 2 Inch Wide Channel Mount, 2 Inch Ball | 87073","description":"\u003cp\u003eThe Husky 87073 is a straight-tongue trailer coupler for a 2-inch hitch ball, rated for 3,500 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 2-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 2-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 3,500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/husky-towing\"\u003eHusky Towing products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405757378811,"sku":"87073","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_c9609daa-bb7b-4bd2-a4d2-72c58dcf7f12.jpg?v=1793129906"},{"product_id":"husky-87074-trailer-coupler","title":"Husky Trailer Coupler – Straight 2-1\/2 Inch Wide Channel Mount, 2 Inch Ball | 87074","description":"\u003cp\u003eThe Husky 87074 is a straight-tongue trailer coupler for a 2-inch hitch ball, rated for 3,500 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 2-1\/2-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 2-1\/2-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 3,500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/husky-towing\"\u003eHusky Towing products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405757640955,"sku":"87074","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_809d9263-4b95-4c0f-9a95-cb844d53a644.jpg?v=1793129906"},{"product_id":"husky-87075-trailer-coupler","title":"Husky Trailer Coupler – Straight 3 Inch Wide Channel Mount, 2 Inch Ball | 87075","description":"\u003cp\u003eThe Husky 87075 is a straight-tongue trailer coupler for a 2-inch hitch ball, rated for 3,500 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 3-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 3-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 3,500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/husky-towing\"\u003eHusky Towing products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405757837563,"sku":"87075","price":28.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_726ea9ab-1ba6-46d3-8590-f5bbecff2e00.jpg?v=1793129906"},{"product_id":"husky-87076-trailer-coupler","title":"Husky Trailer Coupler – Straight 3 Inch Wide Channel Mount, 2 Inch Ball | 87076","description":"\u003cp\u003eThe Husky 87076 is a straight-tongue trailer coupler for a 2-inch hitch ball, rated for 6,000 lbs gross trailer weight. It bolts onto a straight trailer tongue made from 3-inch-wide channel, making it a direct replacement for a worn or damaged coupler on utility, boat and small cargo trailers.\u003c\/p\u003e\u003cp\u003eIt uses a wedge latch with a quick-release assembly for fast locking and unlocking of the ball clamp, and the safety pin is attached by a chain so it doesn't get lost. The coupler has a bare (unpainted) steel finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trailer tongues made from 3-inch-wide channel\u003c\/li\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure the outside width of your trailer tongue and confirm your ball size before ordering. Never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87076\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight tongue, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 6,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge, quick release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87084-trailer-coupler-repair-kit\"\u003eHusky 87084 coupler repair kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405758034171,"sku":"87076","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_9ca5f244-0527-42cb-9b79-faf6947130c2.jpg?v=1793129906"},{"product_id":"husky-87077-trailer-coupler","title":"Husky Trailer Coupler – 2 Inch Ball | 87077","description":"\u003cp\u003eThe Husky 87077 is a weld-on A-frame trailer coupler for a 2-inch hitch ball, rated for 5,000 lbs gross trailer weight. It is designed to be welded to trailers whose A-frame tongue rails meet at a 50-degree angle, and is used to replace a damaged coupler or build a new trailer.\u003c\/p\u003e\u003cp\u003eIt uses a wedge-style latch with a safety chain. The coupler has a black finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA-frame trailer tongues with a 50-degree angle\u003c\/li\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eWelding should be done by a qualified welder. Confirm your trailer's frame angle and ball size before ordering, and never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87077\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e A-frame, weld-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame angle:\u003c\/strong\u003e 50 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 5,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-jacks-rv-leveling-stands\"\u003eTrailer jacks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405758230779,"sku":"87077","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_85cccfe3-6d31-4ffe-932b-af15d3cdf001.jpg?v=1793129906"},{"product_id":"husky-87080-trailer-coupler","title":"Husky Trailer Coupler – 2-5\/16 Inch Ball | 87080","description":"\u003cp\u003eThe Husky 87080 is a weld-on A-frame trailer coupler for a 2-5\/16-inch hitch ball, rated for 10,000 lbs gross trailer weight. It is designed to be welded to trailers whose A-frame tongue rails meet at a 50-degree angle, and is used to replace a damaged coupler or build a new trailer.\u003c\/p\u003e\u003cp\u003eIt uses a wedge-style latch. The coupler has a black finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA-frame trailer tongues with a 50-degree angle\u003c\/li\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eWelding should be done by a qualified welder. Confirm your trailer's frame angle and ball size before ordering, and never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e A-frame, weld-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame angle:\u003c\/strong\u003e 50 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 10,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-jacks-rv-leveling-stands\"\u003eTrailer jacks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405758427387,"sku":"87080","price":54.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_eb6ed180-f336-4e32-be43-56f77ffe64e2.jpg?v=1793129907"},{"product_id":"husky-87081-trailer-coupler","title":"Husky Trailer Coupler – 2-5\/16 Inch Ball | 87081","description":"\u003cp\u003eThe Husky 87081 is a weld-on A-frame trailer coupler for a 2-5\/16-inch hitch ball, rated for 14,000 lbs gross trailer weight. It is designed to be welded to trailers whose A-frame tongue rails meet at a 50-degree angle, and is used to replace a damaged coupler or build a new trailer.\u003c\/p\u003e\u003cp\u003eIt uses a wedge-style latch. The coupler has a black finish.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA-frame trailer tongues with a 50-degree angle\u003c\/li\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eWelding should be done by a qualified welder. Confirm your trailer's frame angle and ball size before ordering, and never tow more than the lowest-rated part of your setup.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e A-frame, weld-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame angle:\u003c\/strong\u003e 50 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 14,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-jacks-rv-leveling-stands\"\u003eTrailer jacks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405758656763,"sku":"87081","price":59.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_171a3e62-9622-4d21-b4dc-c5b74fee39a2.jpg?v=1793129907"},{"product_id":"husky-87082-trailer-coupler-repair-kit","title":"Husky Trailer Coupler Repair Kit – For With 1-7\/8 Inch Couplers Rated At 2000 P | 87082","description":"\u003cp\u003eThe Husky 87082 is a coupler repair kit for 1-7\/8-inch trailer couplers rated at 2,000 lbs. It provides replacement parts to restore a worn or damaged coupler latch mechanism, so you can repair the coupler instead of replacing the whole unit.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1-7\/8-inch couplers rated at 2,000 lbs, such as Husky 87070, 87071 and 87072\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCoupler designs vary by brand and generation. Compare your coupler to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87082\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e 1-7\/8-inch, 2,000 lb couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 90-day warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87070-trailer-coupler\"\u003eHusky 87070 coupler\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405758886139,"sku":"87082","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_0cd92a6a-8a43-452a-a494-6c84ae479ad0.jpg?v=1793129907"},{"product_id":"husky-87084-trailer-coupler-repair-kit","title":"Husky Trailer Coupler Repair Kit – For 2 Inch Couplers Rated At 6000 Pound | 87084","description":"\u003cp\u003eThe Husky 87084 is a coupler repair kit for 2-inch trailer couplers rated at 6,000 lbs. It provides replacement parts to restore a worn or damaged coupler latch mechanism, so you can repair the coupler instead of replacing the whole unit.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2-inch couplers rated at 6,000 lbs, such as the Husky 87076\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCoupler designs vary by brand and generation. Compare your coupler to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Husky Towing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 87084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e 2-inch, 6,000 lb couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Husky lists a limited 90-day warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-87076-trailer-coupler\"\u003eHusky 87076 coupler\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Husky","offers":[{"title":"Default Title","offer_id":68405759082747,"sku":"87084","price":12.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_b02eb4ee-8aa4-4bd8-a785-2f60c193bb9c.jpg?v=1793129907"},{"product_id":"demco-18332-demco-rv-18332-gooseneck-trailer-coupler","title":"Demco Gooseneck Trailer Coupler – EZ Latch, 30000 Pound Capacity, Accepts 2-5\/16 Inch Ball | 18332","description":"\u003cp\u003eThe Demco 18332 is an EZ Latch cast gooseneck coupler head rated for 30,000 lbs gross towing weight, for use with a 2-5\/16-inch gooseneck ball. It is the coupler head only: it is welded to the end of a gooseneck inner tube (Demco offers a matching round inner tube), and it is supplied raw, ready for welding and finishing.\u003c\/p\u003e\u003cp\u003eThe EZ Latch design uses a latch handle to lock the coupler onto the ball, making hookup and release straightforward. Welding should be done by a qualified welder, and the finished coupler's rating is limited by the lowest-rated component in your setup.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch gooseneck hitch balls\u003c\/li\u003e\n\u003cli\u003eWelds to a gooseneck inner tube (round tube, per the manufacturer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eGooseneck tube sizes vary by trailer. Measure your trailer's inner tube, or contact us with your trailer details before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 18332\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e EZ Latch cast gooseneck coupler head (weld-on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross towing capacity:\u003c\/strong\u003e 30,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, raw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/gooseneck-hitches-what-you-should-know-before-towing\"\u003eGooseneck hitches: what you should know before towing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/gooseneck-guide\"\u003eGooseneck guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406602236155,"sku":"18332","price":57.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_05dac919-3358-451a-ac5d-f226b57ed2b4.jpg?v=1793132430"},{"product_id":"demco-05557-95-demco-rv-0555795-trailer-coupler","title":"Demco Trailer Coupler – Class III\/ IV, Straight Tongue, Use With 2-5\/16 Inch Ball | 05557-95","description":"\u003cp\u003eThe Demco 05557-95 is a zinc-plated steel channel-mount trailer coupler for a 2-5\/16-inch hitch ball, rated for 12,500 lbs. It uses Demco's Slide-Lok latch, a positive locking latch that slides over the ball to secure the coupler, with a latch pin to keep it closed. The coupler bolts into a 3-inch channel bracket on a straight trailer tongue.\u003c\/p\u003e\u003cp\u003eThe channel bracket and mounting hardware are not included. Always make sure the hitch ball, channel, bolts and tow vehicle hitch are all rated for the trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch channel brackets on straight trailer tongues\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer's channel and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 05557-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12,500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e Slide-Lok\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-13867-95-demco-rv-1386795-trailer-coupler\"\u003eDemco 13867-95 adjustable channel bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406636937467,"sku":"05557-95","price":101.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_7ddb5d74-3cff-4940-94b0-9078e745aed8.jpg?v=1793132524"},{"product_id":"demco-13203-52-demco-rv-08-8047-trailer-coupler","title":"Demco Trailer Coupler – EZ Latch, Class IV Straight Tongue, Bolt-On | 13203-52","description":"\u003cp\u003eThe Demco 13203-52 is an EZ Latch straight-tongue trailer coupler for a 2-5\/16-inch hitch ball. It bolts onto a 3-inch-wide channel tongue. The EZ Latch locks automatically when the coupler is dropped over the ball, and the low-profile composite latch handle needs no grease or adjustment. The coupler body is stamped steel with a silver finish.\u003c\/p\u003e\u003cp\u003eAlways make sure the hitch ball, mounting bolts and tow vehicle hitch are rated for the trailer's weight; the setup is only as strong as its lowest-rated component. Contact us to confirm this coupler's capacity for your application before ordering.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch-wide straight channel tongues (bolt-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer tongue and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 13203-52\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic, composite handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Stamped steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLocks automatically when dropped over the ball\u003c\/li\u003e\n\u003cli\u003eMaintenance-free latch with no grease or adjustments needed\u003c\/li\u003e\n\u003cli\u003eLow-profile composite latch handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-13203-95-demco-rv-62-2262-trailer-coupler\"\u003eDemco 13203-95 zinc-plated version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406638051579,"sku":"13203-52","price":108.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_e2a6b8b2-74f6-4985-a1f0-5d4e1ddd6858.jpg?v=1793132526"},{"product_id":"demco-13203-95-demco-rv-62-2262-trailer-coupler","title":"Demco Trailer Coupler – EZ Latch, Class IV Straight Tongue, Bolt-On | 13203-95","description":"\u003cp\u003eThe Demco 13203-95 is a zinc-plated EZ Latch straight-tongue trailer coupler for a 2-5\/16-inch hitch ball, rated for 18,000 lbs. It bolts onto a 3-inch-wide channel tongue. The EZ Latch locks automatically when the coupler is dropped over a properly sized ball, making hookup quick and secure, and it's a good choice when building a new trailer or replacing a worn ball coupler.\u003c\/p\u003e\u003cp\u003eAlways make sure the hitch ball, mounting bolts and tow vehicle hitch are rated for the trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch-wide straight channel tongues (bolt-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer tongue and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 13203-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 18,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406638543099,"sku":"13203-95","price":108.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_a95555bc-3fb2-4adc-abb4-927ac86a9e15.jpg?v=1793132527"},{"product_id":"demco-13867-95-demco-rv-1386795-trailer-coupler","title":"Demco Trailer Coupler – Fits 3 Inch Frame Tongue, Bolt-On Channel Mount, 12000 Pound Capacity | 13867-95","description":"\u003cp\u003eThe Demco 13867-95 is a 5-position adjustable channel bracket that bolts onto a 3-inch-wide trailer tongue. The channel is the mounting bracket that a channel-mount coupler, lunette ring or clevis bolts into; its five positions let you set the coupler height to match your tow vehicle so the trailer rides level. It is rated for 12,000 lbs.\u003c\/p\u003e\u003cp\u003eThis is the channel bracket only. The coupler and mounting bolts are sold separately, and this version does not have a jack hole. Make sure every component in your setup, including the coupler, bolts and hitch, is rated for your trailer's weight; the setup is only as strong as its lowest-rated part.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch-wide trailer tongues (bolt-on)\u003c\/li\u003e\n\u003cli\u003eChannel-mount couplers, lunette rings or clevises (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer tongue before ordering, or contact us with your trailer details so we can help match a coupler.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 13867-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Adjustable channel bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 12,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTongue width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack hole:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-05557-95-demco-rv-0555795-trailer-coupler\"\u003eDemco 05557-95 channel-mount coupler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406639198459,"sku":"13867-95","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_4e1c6653-750f-43f6-9497-1a751ee5941b.jpg?v=1793132529"},{"product_id":"demco-14040-81-demco-rv-71-5047-trailer-coupler","title":"Demco Trailer Coupler – Class V Straight Tongue, Fits 2-5\/16 Inch Ball, Bolt-On Channel Mount | 14040-81","description":"\u003cp\u003eThe Demco 14040-81 is a cast EZ Latch channel-mount trailer coupler for a 2-5\/16-inch hitch ball, rated for 21,000 lbs. It bolts into a 3-inch channel on a straight trailer tongue, and when used with an adjustable channel bracket it lets you set the coupler height for different tow vehicles. The EZ Latch snaps closed automatically when the coupler is dropped over the ball, and the composite latch handle resists corrosion and impact.\u003c\/p\u003e\u003cp\u003eThe channel bracket and mounting bolts are not included. Make sure the hitch ball, channel, bolts and tow vehicle hitch are all rated for your trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch channel brackets on straight trailer tongues\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer's channel and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 14040-81\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 21,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic, composite handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cast steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-14040-95-demco-rv-08-8049-trailer-coupler\"\u003eDemco 14040-95 zinc-plated version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406639919355,"sku":"14040-81","price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_b6fd03cd-5a08-43f9-a26e-e907862720b8.jpg?v=1793132530"},{"product_id":"demco-14040-95-demco-rv-08-8049-trailer-coupler","title":"Demco Trailer Coupler – Class V Straight Tongue, Use With 2-5\/16 Inch Ball, Bolt-On Channel Mount | 14040-95","description":"\u003cp\u003eThe Demco 14040-95 is a cast EZ Latch channel-mount trailer coupler for a 2-5\/16-inch hitch ball, rated for 21,000 lbs. It bolts into a 3-inch channel on a straight trailer tongue, and when used with an adjustable channel bracket it lets you set the coupler height for different tow vehicles. The EZ Latch snaps closed automatically when the coupler is dropped over the ball, and the composite latch handle resists corrosion and impact.\u003c\/p\u003e\u003cp\u003eThe channel bracket and mounting bolts are not included. Make sure the hitch ball, channel, bolts and tow vehicle hitch are all rated for your trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch channel brackets on straight trailer tongues\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer's channel and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 14040-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 21,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic, composite handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cast steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-14040-81-demco-rv-71-5047-trailer-coupler\"\u003eDemco 14040-81 black version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406640410875,"sku":"14040-95","price":96.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_f9f0548a-886f-4dff-8027-6fe771acaee5.jpg?v=1793132532"},{"product_id":"demco-15791-97-demco-rv-07-7225-trailer-coupler","title":"Demco Trailer Coupler – Class III and IV, Bolts To Trailers With 3 Inch Frame, 21000 Pound Gross Traile | 15791-97","description":"\u003cp\u003eThe Demco 15791-97 is a primed EZ Latch channel-mount trailer coupler for a 2-5\/16-inch hitch ball, rated for 21,000 lbs gross trailer weight. It bolts into a 3-inch-wide channel bracket on the trailer frame, and the EZ Latch locks automatically when the coupler is dropped over the ball. The primed finish is ready for painting to match your trailer.\u003c\/p\u003e\u003cp\u003eThe channel bracket and mounting bolts are not included; per the manufacturer's data, the 21,000 lb rating requires four 5\/8-inch Grade 5 mounting bolts. Make sure the hitch ball, channel and tow vehicle hitch are rated for your trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch-wide channel brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer's channel and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 15791-97\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 21,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting bolts required:\u003c\/strong\u003e Four 5\/8-inch Grade 5 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack hole:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, primed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406641361147,"sku":"15791-97","price":98.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_9b39e687-ce79-41c0-8f13-783ba1071bf6.jpg?v=1793132533"},{"product_id":"demco-15945-demco-rv-03-2649-trailer-coupler","title":"Demco Trailer Coupler – EZ Latch, Class III Straight Tongue, Bolt-On 3 Inch Channel Mount | 15945","description":"\u003cp\u003eThe Demco 15945 is a zinc-plated EZ Latch straight-tongue trailer coupler for a 2-inch hitch ball, rated for 7,000 lbs. It bolts onto a 3-inch-wide channel tongue. The EZ Latch locks automatically when the coupler is dropped onto the ball, the latch is built in so it can't be lost or misplaced, and it needs no grease or adjustment. Demco states the EZ Latch meets SAE J684 coupler requirements.\u003c\/p\u003e\u003cp\u003eAlways make sure the hitch ball, mounting bolts and tow vehicle hitch are rated for the trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch-wide straight channel tongues (bolt-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer tongue and check its bolt-hole spacing before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 15945\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Bolt-on, 3-inch channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406641852667,"sku":"15945","price":47.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_7497cd5b-5738-4176-8b98-2d685c93b451.jpg?v=1793132535"},{"product_id":"demco-16698-81-demco-rv-03-2716-trailer-coupler","title":"Demco Trailer Coupler – Class A-Frame Tongue, Weld-On, 10000 Pound GVRW | 16698-81","description":"\u003cp\u003eThe Demco 16698-81 is a black weld-on EZ Latch A-frame trailer coupler for a 2-inch hitch ball, rated for 10,000 lbs gross vehicle weight. It is designed to be welded to the front of an A-frame (V-shaped) trailer tongue, and the EZ Latch locks automatically when the coupler is dropped over the ball. It is a good choice when building a new trailer or replacing a worn A-frame coupler.\u003c\/p\u003e\u003cp\u003eWelding should be done by a qualified welder. Make sure the hitch ball and tow vehicle hitch are rated for the trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-inch hitch balls\u003c\/li\u003e\n\u003cli\u003eA-frame trailer tongues (weld-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eA-frame angles and tongue sizes vary. Compare your existing coupler to the product photo, or contact us with your trailer details before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 16698-81\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10,000 lbs GVWR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Weld-on, A-frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black paint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-17063-97-demco-rv-30-3823-trailer-coupler\"\u003eDemco 17063-97 21K A-frame coupler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406642376955,"sku":"16698-81","price":66.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_f51499dd-3ef6-45c8-8f29-a3c0c297b7ff.jpg?v=1793132536"},{"product_id":"demco-17063-97-demco-rv-30-3823-trailer-coupler","title":"Demco Trailer Coupler – Class III and IV, Weld-On To Trailers With A-Frame, 21000 Pound Gross Trailer W | 17063-97","description":"\u003cp\u003eThe Demco 17063-97 is a primed weld-on A-frame trailer coupler for a 2-5\/16-inch hitch ball, rated for 21,000 lbs gross trailer weight. It is designed to be welded to the front of an A-frame (V-shaped) trailer tongue, and its EZ Latch with composite handle locks automatically when the coupler is dropped over the ball. The primed finish is ready for painting to match your trailer.\u003c\/p\u003e\u003cp\u003eWelding should be done by a qualified welder. Make sure the hitch ball and tow vehicle hitch are rated for the trailer's weight; the setup is only as strong as its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003eA-frame trailer tongues (weld-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eA-frame angles and tongue sizes vary. Compare your existing coupler to the product photo, or contact us with your trailer details before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 17063-97\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross trailer weight:\u003c\/strong\u003e 21,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Weld-on, A-frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic, composite handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, primed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-16698-81-demco-rv-03-2716-trailer-coupler\"\u003eDemco 16698-81 10K A-frame coupler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-balls\"\u003eHitch balls\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406643556603,"sku":"17063-97","price":85.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_72007a75-97c9-455a-b3d4-4a2f44b58af2.jpg?v=1793132538"},{"product_id":"demco-6125-95-demco-rv-62-2251-trailer-coupler","title":"Demco Trailer Coupler – EZ Latch, Class III Straight Tongue, Bolt-On | 6125-95","description":"\u003cp\u003eThe Demco 6125-95 is a zinc-plated EZ Latch straight-tongue trailer coupler for a 2-5\/16-inch hitch ball that comes with its own adjustable channel. The 12-inch channel bolts onto a 3-inch-wide trailer tongue and has six mounting holes on 2-inch centers, giving five height positions so you can level the trailer with your tow vehicle. The EZ Latch locks automatically when the coupler is dropped over the ball and releases when the handle is lifted.\u003c\/p\u003e\u003cp\u003eThe kit includes Grade 5 bolts and nuts plus two gussets for added support. A 5\/16-inch pin hole on the side of the coupler accepts a lock pin (sold separately). Make sure the hitch ball and tow vehicle hitch are rated for your trailer's weight; contact us to confirm this coupler's rating for your application.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-5\/16-inch hitch balls\u003c\/li\u003e\n\u003cli\u003e3-inch-wide straight trailer tongues (bolt-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eMeasure your trailer tongue before ordering, or contact us with your trailer details.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6125-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 2-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel:\u003c\/strong\u003e 12 inches tall, 3-inch inside width, 6 holes \/ 5 positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch:\u003c\/strong\u003e EZ Latch, automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock pin hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e Steel, zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEZ Latch coupler\u003c\/li\u003e\n\u003cli\u003e12-inch adjustable channel\u003c\/li\u003e\n\u003cli\u003eGrade 5 bolts and nuts\u003c\/li\u003e\n\u003cli\u003eTwo gussets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hitch-pins-clips-locks\"\u003eHitch pins, clips \u0026amp; locks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406644048123,"sku":"6125-95","price":143.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_2ba04181-1ae1-4b86-a684-9e4205e8db15.jpg?v=1793132539"},{"product_id":"demco-6008-demco-rv-07-7232-trailer-coupler-handle","title":"Demco Trailer Coupler Handle – Single | 6008","description":"\u003cp\u003eThe Demco 6008 is a replacement nylon latch handle for Demco EZ Latch couplers that fit a 2-5\/16-inch hitch ball. The handle is the part you lift to release the coupler from the ball. Replace it if the original is cracked, broken or worn so the latch can be operated properly.\u003c\/p\u003e\u003cp\u003eThis listing is for one handle.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDemco EZ Latch 2-5\/16-inch couplers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eDemco has used more than one EZ Latch handle design. Compare your existing handle to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-6317-demco-rv-30-1847-trailer-coupler-handle\"\u003eDemco 6317 handle for 21K couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406646014203,"sku":"6008","price":36.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_3023b0a5-a3bb-4fd0-bcde-4a5181961e19.jpg?v=1793132544"},{"product_id":"demco-6317-demco-rv-30-1847-trailer-coupler-handle","title":"Demco Trailer Coupler Handle – EZ Latch, Replacement For Demco 21K Couplers, Single | 6317","description":"\u003cp\u003eThe Demco 6317 is a replacement nylon EZ Latch handle for Demco 21K (21,000 lb) couplers. The handle is the part you lift to release the coupler from the ball. Replace it if the original is cracked, broken or worn so the latch can be operated properly.\u003c\/p\u003e\u003cp\u003eThis listing is for one handle.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDemco 21K EZ Latch couplers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eDemco has used more than one EZ Latch handle design. Compare your existing handle to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6317\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-6008-demco-rv-07-7232-trailer-coupler-handle\"\u003eDemco 6008 handle for 2-5\/16-inch EZ Latch couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406646964475,"sku":"6317","price":7.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_e31135eb-a478-4e3d-bc63-dc0aed58d955.jpg?v=1793132546"},{"product_id":"demco-6109-demco-rv-08-8050-trailer-coupler-repair-kit","title":"Demco Trailer Coupler Repair Kit – EZ Latch | 6109","description":"\u003cp\u003eThe Demco 6109 is an EZ Latch repair kit for Demco composite 2-inch, 10,000 lb trailer couplers. Use it to restore the latch mechanism on a coupler that no longer latches or releases properly, instead of replacing the entire coupler.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eDemco makes repair kits for several coupler styles. Check your coupler's ball size, rating and part number, or contact us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDemco composite EZ Latch couplers, 2-inch ball, 10,000 lb\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e EZ Latch repair kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-13427-demco-rv-13427-trailer-coupler-repair-kit\"\u003eDemco 13427 EZ Latch repair kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406647521531,"sku":"6109","price":36.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_cecc0b2f-7ef5-4c9e-a788-e3af1c267f61.jpg?v=1793132555"},{"product_id":"demco-6288-demco-rv-30-0664-trailer-coupler-repair-kit","title":"Demco Trailer Coupler Repair Kit – Recon, For Demco EZ Latch Cast Coupler | 6288","description":"\u003cp\u003eThe Demco 6288 is a latch repair kit for Demco EZ Latch cast couplers. It replaces the latch on models that use the composite low-profile EZ Latch handle, restoring a coupler that no longer latches or releases properly without replacing the entire coupler.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDemco EZ Latch cast couplers with the composite low-profile latch handle\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eDemco makes repair kits for several coupler styles. Compare your coupler's latch to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6288\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e EZ Latch repair kit, cast couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-6317-demco-rv-30-1847-trailer-coupler-handle\"\u003eDemco 6317 handle for 21K couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406648013051,"sku":"6288","price":35.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3851\/7755\/files\/ImageServerAPI_0126751d-a5c3-44a7-befb-17662618f2e4.jpg?v=1793132557"},{"product_id":"demco-13427-demco-rv-13427-trailer-coupler-repair-kit","title":"Demco Trailer Coupler Repair Kit – EZ Latch | 13427","description":"\u003cp\u003eThe Demco 13427 is a replacement top latch for Demco eZ-Latch trailer couplers. The top latch is the part of the eZ-Latch mechanism that closes over the hitch ball when the coupler is dropped into place. Replace it if the latch is worn, bent or no longer locks reliably.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDemco eZ-Latch couplers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eDemco makes repair kits for several coupler styles. Compare your coupler's latch to the product photo, or contact us with your coupler's part number before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Demco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 13427\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replacement top latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e About 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHelpful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/demco-6109-demco-rv-08-8050-trailer-coupler-repair-kit\"\u003eDemco 6109 repair kit for composite 2-inch couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/trailer-couplers\"\u003eTrailer couplers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Availability\u003c\/h3\u003e\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Demco","offers":[{"title":"Default Title","offer_id":68406648275195,"sku":"13427","price":5.07,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/rvtowingpros.com\/collections\/trailer-couplers.oembed?page=2","provider":"RV Towing Pros","version":"1.0","type":"link"}